Digital Projector Give a Bigger Picture

Digital Projector -- Give a Bigger Picture
By NamSing Then

Digital projectors are those video projectors which are used in conferences for presentations. The digital projectors receive video signals from, usually, desktop computers and display images on large screens which can be easily comprehended by all in the gathering.

Two Types of Digital ProjectorsTo begin with, there are two technologies used by digital projectors, the older one being the LCD, liquid crystal display with independent transparent panels of LCD for each constituent primary color (red, blue and green.) The image transmission depends on the signal received by the projector from PC which redirects the light signals through these LCD panels and lens onto a screen. The LCD projectors look pretty similar to older slide projectors and are simple in construction and thus cost less in comparison to their successors DLP projectors. The LCD can be thought of as slides placed at the focal length of the lens making it complete. Clarity of picture in LCD projectors depends on the number of pixels it is set for. (Pixels are smallest area of data or picture holders)

DLP Projectors: The Latest of the Digital ProjectorsDigital Light Processing or DLP is a technology developed by Texas Instruments in 1987. DLP projectors bring in a paradigm difference in technology in image projection to board rooms. Unlike their predecessors, DLP projectors make use of tiny mirrors or micro mirrors to reflect light images to pass through the projector lens and onto a screen. Each mirror can be thought of as representing a pixel. The mirrors reflect primary colors in rapidly rotating succession as actuated by a rotating color filter wheel. The image of rapidly changing colors constructs images for human eye perception. The micro mirrors are collectively called as DMD or digital micromirror device.

For the sake of enhancing picture clarity, the rotating wheel is provided with a plain patch which allows plain white light. This type of DMD projectors are also known as single chip projectors. The three chip projectors are a bit complicated but offer better clarity. Here a prism splits the light from lamp into primary colors which are redirected to DMD which recombines them before projecting through the lens.

Where Is the DifferenceDLP projectors are lighter and give far better pictures. Single chip resolves 16.7 colors while the three chip model does a, hold your breath, 35 trillion colors.

Commercial ModelsTexas Instruments is the pioneer who owns the patent for DLP technology. Fraunhofer Institute of Dresden of Germany developed the same technology simultaneously and markets it as Spatial Light Modulators. HP, Samsung are other market leaders in both LCD and DLP technologies.

NamSing Then is a regular article contributor on many topics. Be sure to visit his other websites Digital Video Camera, Lcd Tv Monitor and One Stop Information

Article Source: http://EzineArticles.com/?expert=NamSingThen
http://EzineArticles.com/?Digital-Projector----Give-a-Bigger-Picture&id=258962

How You Can Increase The Lifespan Of Your Projector Bulb Or Lamp

How You Can Increase The Lifespan Of Your Projector Bulb Or Lamp
By Clifford Tan

The replacement of projector bulbs is an all-too-frequent occurrence for anybody that has owned a home theater projector for any length of time. While a two thousand hour lifespan may sound like a lifetime to some people, rest assured it is not long before the projector lamp will need replacing. There are however, some general tips that can help to expand the life of a headlamp for the projection unit.

Do not touch the lamp with bare hands
One of the most frequent problems encountered is people replacing the bulbs with their bare hands. While this is fine for an ordinary light bulb, it is not a good practice for a projector lamp. The lamp in a projection unit burns much hotter than any regular light bulbs. The effects of touching it with bare skin are equally magnified and problematic.

Touching a projector bulb with the bare skin leaves traces of oil on the lamp surface. While this may seem a very minor detail, it is detrimental both to the bulb and the quality of the resulting multimedia display. The oils will get burnt onto the lamp and drastically reduce the lifespan. As the oil is baked into the surface, it actually diffuses the light being projected, reducing the lumens actually being sent to the refractive surfaces. The light will not be enough to project the image that has come to be expected from the home theater projection system. While the problem may not be noticeable at first, over the course of a little time, the quality will degrade to the point of not being viewable.

Turn off the projector power after turning off the lamp
It is highly recommended to turn the power on the projector to the off position only after having turned off the lamp and allowing it to cool. This will allow the cooling fans to do the job they were designed to do. While rapid cooling and heating result in repeated contractions and expansions of the bulb filament, it is much better that it be done more quickly with the cooling fans. Likewise, turning the projector on and allowing the cooling fans to run for a moment before turning on the lamp will help as well. This will add hours to bulb life expectancy and allow for longer hours of viewing pleasure on the home theater projection system.

Constant Movements
Constantly bumping or moving the projector, especially while it is hot can be very detrimental to the projector lamp. The filament in the bulb loses almost all tensile strength when it is heated during normal usage. It is much the same as the filament in a camp lantern. The principle is the same; the filament effectively becomes almost the same consistency as ash, making it extremely vulnerable to damage when it is hot. Even after proper cooling, the lamp filament is very sensitive. Care should be taken when moving the projector for whatever reason. While it is always a good idea to be careful with electronic equipment, some aspects of the home projector are actually a bit more sensitive.

It will usually be necessary to move the projector when cleaning the filters. As always, it is a good idea to move it carefully without jerking it around or bumping it any more than needed. Taking an extra moment or two to check the projector mount and make sure it is still securely fastened can also be beneficial and prevent slips and movement which may otherwise be harmful.

With a little care and a little preventative maintenance, the projector lamps will still need to be changed, but not nearly as often.

Note: This article may be republish for use in websites as long as the author bio and active hyperlinks are kept intact.

Clifford Tan, a Home Theater enthusiast and owner of the website Home Projector Advisor offering projector reviews, advice and many useful tips and hints to business and home consumers looking to purchase a home projectors. To find out alot more information about home projection system, visit the site http://www.home-projector-advisor.com

Article Source: http://EzineArticles.com/?expert=CliffordTan
http://EzineArticles.com/?How-You-Can-Increase-The-Lifespan-Of-Your-Projector-Bulb-Or-Lamp&id=192918

Video Projectors

Video Projectors
By Elizabeth Morgan

Some of the various indispensable parts of a video projector are the feed spool, xenon arc lamp, projection lens, optical sound head, take up spool, an aperture, normal lens and a rotating shutter. But with the advancement of science, new technologies have come into play. The projectors have become much more advanced in terms of clarity of picture and the quality of the pixels. Also, the projectors have found use in everyday households, as new versions of domestic projectors have arrived on the market. The abundance of LCD projectors, DLP projectors and video projectors has allowed the common man to enjoy the experience of a big theater hall in his living room.

Video projectors have become very common throughout the world. One can have all the excitement and enjoyment of a big movie blockbuster at home. They are also used in schools and colleges where it is necessary to show videos and films on a regular basis to a large number of people.

It is always advisable to the users of video projectors or projection televisions to pay attention to the scaler. One can use a number of processors, scalers or switches to optimize the video sources to best match the native resolution of your video projector, flat panel, or LCD/DLP-based rear projection television. Video projectors have some kind of capability for scaling. Making use of or implementing an outboard processor or a scaler can raise the performance level to a much higher level for both video display and source components.

Projectors provides detailed information on Projectors, LCD Projectors, DLP Projectors, Video Projectors and more. Projectors is affiliated with DVD Projector Rentals.

Article Source: http://EzineArticles.com/?expert=ElizabethMorgan
http://EzineArticles.com/?Video-Projectors&id=277897

panasonic projector

panasonic projector lamp: panasonic projector lamp
Panasonic projector lamps / Panasonic Projector bulbs / spare lamp . ... Panasonic Projector lamp modules, Panasonic replacement bulbs, Panasonic projector ...panasonic-projector-lamp.blogspot.com/2007/08/panasonic-projector-lamp.html

PROVANTAGE.COM: Listing of Panasonic - Projector Lamps
Get Fast Service and Low Prices on Listing of Panasonic - Projector Lamps and Over 200000 Other Items at PROVANTAGE.www.provantage.com/~56ALAMPSPSON.htm


Panasonic Compare Prices on Replacement Projector Lamps and ...
Panasonic Compare Prices on Replacement Projector Lamps and Projector Bulbs for any Projector.www.projectorcentral.com/Panasonic-lamp-suppliers.htm


Panasonic Projector PT-D7700E ** Large Venue DLP Projector with ...
Panasonic Projector PT-D7700E ** Large Venue DLP Projector with BriteOptic Dual- Lamp Technology ** - -
Featuring Texas Instruments Digital Light ...projectorworld.tarad.com/